Need help?Do you have a question about the Fox jeep jk and is the answer not in the manual?
General| Brand | Fox |
|---|---|
| Model | jeep jk |
| Category | Automobile |
| Language | English |
Emphasizes reading general installation guidelines before proceeding with shock installation.
Step to remove the front wheels of the vehicle to access the shocks.
Instruction to detach and remove the original front shock absorbers.
Guides on mounting the FOX reservoir brackets to the vehicle frame.
Instructions for installing an aftermarket lower relocation bracket, if used.
Procedure for connecting the FOX shock to the upper vehicle mount.
Process for attaching the FOX shock to the lower vehicle mount.
Details on using supplied clamps to securely mount the shock reservoir.
Verifying proper suspension clearance by turning the steering wheel fully.
Step to reinstall the front wheels and torque them to specifications.
Specifies the ideal ride height shaft extension for optimal performance.
Step to remove the rear wheels of the vehicle for shock access.
Instruction to detach and remove the original rear shock absorbers.
Procedure for installing the new FOX rear shock, noting reservoir orientation.
Guidance on adjusting the reservoir position using a spanner wrench if clearance is an issue.
Verifying that the rear suspension has adequate clearance after installation.
Step to reinstall the rear wheels and torque them to factory specifications.
Specifies the ideal ride height shaft extension for rear shock performance.
Details the limited one-year warranty coverage for FOX suspension products.
Outlines the conditions, limitations, and exclusions of the FOX product warranty.
Provides recommended service mileage intervals based on usage type (street/offroad).
To Next Page