GB
STALKER BIVVY X
GB
STALKER BIVVY X
No 6 Additional groundsheet
available with corresponding
buckles to match the Stalker
Bivvy X to allow easy assembly.
The two front buckles will need
to be undone to enable the
shelter to be raised or lowered.
TIP: In windy conditions,
you will find it easier to
loosely peg your Stalker
Bivvy X down with one of
the rear peg down points
and erect it ‘side into the
wind’.
No 5 Peg out rear pegging
points first then adjust sides
to suit conditions.
To Next Page
Loading...
