Need help?Do you have a question about the FoxAlien VASTO and is the answer not in the manual?
General| Brand | FoxAlien |
|---|---|
| Model | VASTO |
| Category | Control Systems |
| Language | English |
Assemble Y-axis profiles and dust baffles using specific bolts and fasteners.
Connect X-axis profiles using bolts, washers, and spring washers for frame stability.
Secure the main frame structure with M5*30 bolts and washers.
Attach the MDF spoil board to the frame using M5*16 bolts.
Mount the X-axis gantry assembly onto the main machine frame.
Install the Z-axis module and its corresponding limit switch onto the gantry.
Attach the spindle holder and spindle to the Z-axis module.
Mount X-axis drag chain support brackets using M5*6 bolts.
Install Y-axis drag chain brackets with T-nuts and bolts.
Connect the Y-axis drag chain to the machine frame using flat head cap screws.
Secure the X-axis drag chain to the machine frame.
Guides users through installing necessary drivers for the Grblcontrol software.
Explains the Grblcontrol (Candle) software interface components and functions.
Provides steps to perform the initial cutting operation with the machine.
To Next Page
