Need help?Do you have a question about the FoxAlien Masuter and is the answer not in the manual?
General| Input Voltage | 12V |
|---|---|
| Input Current | 5A |
| Spindle Power | 60W |
| Spindle Speed | 10000 r/min |
| Motor | NEMA17 |
| Limit Switch | X, Y, Z |
| Firmware Version | 1.1H |
| Support OS | Windows XP, Windows 7, Windows 8, Windows 10, Linux, Mac OS |
| Software | Grblcontrol(Candle), other GRBL compatible software |
| Support Add-ons | Laser, offline controller, 300W spindle (NOT included) |
| Emergency Stop Button | Yes |
| Offline Working | Supports offline working, offline control sold separately |
Weight and Dimensions| Working Area | 400 x 380 x 55mm (15.75” x 14.96” x 2.16”) |
|---|
Essential safety guidelines for operating the CNC machine to prevent injury and damage.
Assemble the primary frame components including Y-axis and X-axis profiles and reinforcements.
Mount the X-axis gantry and Z-axis assembly onto the machine structure.
Connects the machine, checks software status, and handles potential limit switch triggers.
Loading G-code, setting XY origin, selecting feed/step, and starting the engraving.
To Next Page
