39
3
displayed in the center of the screen.
Select [Yes] to save your changes and reset computer, select
displayed in the center of the screen.
Select [Yes] to exit setup utility and reset computer without
main menu.
Optimal defaults are the best settings of this motherboard.
Always load the Optimal defaults after updating the BIOS or
after clearing the CMOS values.
Select this option and press Enter, it will pop out a dialogue
will not load.
By this default, BIOS have set the optimal performance
parameters of system to improve the performances of system
components. But if the optimal performance parameters to be set cannot be supported by your
hardware devices (for example, too many expansion cards were installed), the system might
fail to work.
Save configuration and reset?
Yes No
Save & Reset
Yes
Reset without saving?
Yes No
Reset Without Saving
Yes
Load Optimized Defaults?
Yes No
Load Optimized Defaults
Yes
Save Changes and Reset
Discard Changes and Reset
Restore Defaults
Boot Override
Enter: Select
F1: General Help
F3: Optimized Defaults
ESC: Exit
Reset the system after saving
the change.
Main Advanced Chipset Boot Power Health Security Save & Exit
Save & Exit
To Next Page
Loading...
