Chapter 3 BIOS Description
37
vDate (of Month) Alarm
When the Resume by Alarm set as “Enabled”, this item will be modified. It is
used to set the timing for the start-up date.
vTime (hh:mm:ss) Alarm
When the Resume by Alarm set as “Enabled”, this item will be modified. It is
used to set the timing for the start-up time.
vFDD,COM,LPT Port
When this item is enable,the system will restart the power saving time-out
counters when any activity is detected on the floppy disk drive,serial ports,or
the parallel port.
vPCI PIRQ[A-D]#
When this item is disabled,any PCI device set as the Master will not power on
the system.
PDF 文件使用 "pdfFactory" 试用版本创建 www.fineprint.com.cn
To Next Page
Loading...
