Foxfury Lighting Solutions RUGO Series User Manual

QUICK START GUIDE
P/N 85-027
RUGO DRONE MOUNTS
FOR DJI PHANTOM 4 (SET OF 2)
HOW TO ATTACH MOUNTS
1. Start by matching the correct side of the
RUGO to the Drone Mount, making sure
the metal tab of the RUGO fits into the
Drone Mount notch.
2. Use the (2) two thumb screws to attach
the RUGO to the Drone Mount.
3. To attach the Drone Mount to the
Phantom 4 Drone, position both sides
of the mount on the drone landing gear
skid legs, rotate down to snap the Drone
Mount arms around the landing gear skid
legs. Slide the Drone Mount down the
landing gear skid legs until the bottom
arm of the Drone Mount snaps onto the
bottom of the landing gear skid leg.
4. Repeat on both sides.
5. Reverse these steps to remove the Drone
Mounts
WHAT'S INCLUDED:
(2) RUGO Drone Mounts
(2) Thumb Screws
GENERAL MAINTENANCE TIPS
As needed, wash the FoxFury Drone
Mounts using a soft washcloth, clean
water and a mild soap. When done, pat
dry with a soft cloth.
4/2018
1
2
3
4
5

Foxfury Lighting Solutions RUGO Series Specifications

General

Category	Drone & Quadcopter Accessories
Manufacturer	Foxfury Lighting Solutions
Series	RUGO
Light Output	700 lumens
Color Temperature	5700K
IP Rating	IPX7

Summary

How to Attach Mounts

What's Included

General Maintenance Tips

Warranty and Other Information

Warnings

Critical safety warnings for product operation, including heat, LED exposure, and supervision.

Limited Warranty

Details the product's two-year warranty against material and workmanship defects.

Contact Foxfury

Provides contact details for FoxFury customer service and company information.