NT201 OBDII/EOBD Code Reader User’s Guide_English Version_V1.00
Figure 4-3 Sample Diagnostic Menu Screen
2. Select Stored Codes/Pending Codes and press the ENTER key to confirm.
Figure 4-4 Sample Read Codes Screen
3. A code list including code number and its description displays.
Figure 4-5 Sample DTC Description Screen
If no DTCs are present, the message “No (Pending) Codes Found!” is displayed. If any
manufacturer specific or enhanced codes detected, NT201 reads the correct DTC information
automatically according to the VIN.
Erase Codes menu lets you to clear all current DTCs from the control module. Also it erases all
temporary ECU information, including freeze frame. So make sure that the selected system are
To Next Page
Loading...