Need help?Do you have a question about the Foxydry AIR-150 and is the answer not in the manual?
Lists all tools required for assembling the FOXYDRY unit.
Provides the main title for the assembly steps in various languages.
Warns against misuse and ingestion of small parts, stating it's not a toy.
Alerts users about the maximum load limit of 35 kg to prevent damage.
Emphasizes the need for a solid ceiling and correct plug usage for safe installation.
Advises against placing hands in moving parts and recommends qualified personnel.
Lists all components included in the FOXYDRY packaging.
Details the central body and remote control of the FOXYDRY.
Describes the scissor-type side structures and extendable rails.
Shows the maximum dimensions of the FOXYDRY when open.
Provides instructions and measurements for drilling holes in the ceiling.
Explains how to attach the main body to the ceiling using plugs and nuts.
Details how to screw the side structures to the main body.
Guides on sliding cables and fitting plastic covers.
Instructions on disconnecting power and connecting FOXYDRY to the mains.
Steps to pair the remote control with the FOXYDRY unit.
How to activate the maximum descent and ascent limit switches.
Instructions for fastening the thin rails using screws.
Guides on securing the extendable rails in their seats.
Instructions to screw the plastic covers back onto the main body.
How to lower, raise, and stop the drying rack.
How to turn the light and fans on/off, noting auto-shutoff.
Explains the automatic stop during downward movement due to obstacles.
Details automatic stops for overload (>35kg) and thermal protection.
To Next Page
General
