4
ENGINE TECHNICAL DATA N45 MNA - N45 MSA
The technical code and serial number are indicated on a plate, which
is located on different parts of the engine, according to the model:
flywheel casing, tappet cover, other.
(*)Net power to the flywheel in compliance with ISO 3046-1. Test
conditions: temperature 25 °C; atmospheric pressure 100 kPa;
relative humidity 30%.
Code N45 MNA / MSA
Engine family F4
Cycle 4-stroke diesel
Number and arrangement
of cylinders 4, in line
Bore x stroke 104 x 132 mm
Total displacement 4,500 cm
3
Air system Aspiration
Injection type Direct with rotating pump
Engine direction of
rotation
Anticlockwise (seen from
flywheel side)
Dry weight 380 kg
Electrical system 12 V
Accumulator/s
- capacity
- discharge current
100 Ah or above
650 A or above
Performance: Maximum power (*)
Maximum torque
N45 MNA / MSA 60 kW (81 CV) @ 2300 rpm
320 Nm (33 Kgm) @ 1400 rpm
WARNING
Any alteration of the above mentioned characteristics is strictly
prohibited, penalty invalidation of the guarantee and absence of all
liability on the part of IVECO MOTORS.
To Next Page
Loading...
