62
ENGINE HANDLING
The engine must only be removed and installed by authorised Service
Centre personnel.
For lifting only the engine use the eyelets indicated in this manual in
the chapter ENGINE TECHNICAL DATA and marked on the engine
with specific plates.
It must be hoisted using a rocker arm that keeps the wire cables that
support the engine parallel, using all the provided eyelets at the same
time; The use of a lower number of lifting eyelets is not permitted.
The capacity and dimensions of the engine hoisting system must be
suitable for the engine weight and dimensions; make sure there is no
interference between the hoisting system and the engine components.
Do not hoist the engine before removing the transmission
components coupled to it.
DISPOSAL OF WASTE
The engine consists of parts and elements that can cause ecological
damage if disposed of in the environment.
The materials listed below must be delivered to authorised collection
centres:
Starter batteries.
Spent lubricant oils.
Water and antifreeze mixtures.
Filters.
Auxiliary cleaning material (e.g. rags soaked in or moistened with
fuel).
Laws in force in various Countries provide for severe penalties to
offenders.
To Next Page
