Need help?Do you have a question about the Fracarro MOD-HDTV and is the answer not in the manual?
General| Input Frequency Range | 47-862 MHz |
|---|---|
| Output Level | 85 dBµV |
| MER | >42 dB |
| Input | HDMI |
| Frequency Range | 47-862 MHz |
| Channel Bandwidth | 6, 7, 8 MHz |
| Standard | DVB-T |
| Modulation | QAM, QPSK |
Guidance on safe installation practices, avoiding water, heat, and ensuring ventilation.
Instructions for connecting the antenna system to the earth electrode as per EN60728-11.
Monitors device functionality and performs recovery procedures in case of internal faults.
Locks device keys after idle time to prevent unwanted settings and accidental changes.
Automatically switches to a secondary input source if the primary source fails.
Enables PC connection for advanced configuration, software updates, and driver installation.
Step-by-step guide for programming using the on-board controls and seven-segment display.
Information on downloading and using the PC software for advanced modulator settings.
Lists compatible operating systems (Windows XP, Vista, 7, 8) for the modulator's software.
Instructions for connecting the modulator to a PC and navigating the software interface.
Parameters for H.264 encoding, including input source selection and video/audio bitrates.
Configuration of multiplexer parameters like Network Name, Program Name, TS ID, and PIDs.
Details on modulator status, firmware version, software version, and serial number.
Explanation of GET, APPLY, Factory Defaults, and Reset System buttons for configuration.
To Next Page
