Need help?Do you have a question about the Fractal Meshify 2 XL and is the answer not in the manual?
Detailed technical specifications for the computer case, including dimensions, drive bays, and compatibility.
Identifies and describes the main components of the computer case.
Illustrates a configuration for water cooling reservoir setup within the case.
Illustrates a configuration for building a server system.
Lists and describes the included screws, brackets, and installation tools.
Step-by-step instructions for detaching the side panels of the computer case.
Guide for correctly installing the PSU into the computer case.
Instructions for safely detaching the top bracket assembly.
Steps for preparing the motherboard before installing it in the case.
Guide for installing the motherboard's I/O shield.
Instructions for mounting the prepared motherboard into the case.
Connecting front panel cables and chassis fans to the motherboard.
Guide for connecting fans and power to the Nexus+ 2 fan hub.
Step-by-step instructions for installing a graphics card.
Instructions for installing a 2.5-inch storage drive.
Instructions for installing 3.5-inch or 2.5-inch storage drives.
Guide for reattaching the top panel after assembly.
Instructions for moving the hard drive cage to a different position.
Steps for removing the hard drive cage from the case.
Guide for mounting 3.5" or 2.5" drives onto a multibracket.
Shows alternative locations for mounting 2.5-inch drive trays.
Instructions for removing top and front panels for easier access.
Guide for reconfiguring the case for maximum storage.
Instructions for adding 3.5-inch or 2.5-inch trays in storage layout.
Shows alternative slots for graphics card installation.
Guide for mounting a pump unit onto a multibracket.
Instructions for adding a fillport for the water cooling system.
Guide for removing and reattaching the front dust filter.
Instructions for removing the front filter to improve airflow.
Guide for removing internal inlays to accommodate fans or radiators.
Diagrams showing all possible locations for installing fans.
Details on compatible radiator sizes and placement options.
Illustrates different water cooling system configurations.
Instructions for cleaning and maintaining dust filters.
Information on maximum CPU cooler height clearance.
Information on maximum graphics card length clearance.
Technical specifications for the included Dynamic X2 GP-14 fans.
Instructions on how to contact customer support for help.
General| Form Factor | Full Tower |
|---|---|
| Material | Steel, Tempered Glass |
| Expansion Slots | 9 + 3 vertical |
| Maximum CPU Cooler Height | 185 mm |
| Maximum PSU Length | 250 mm |
| Dust Filters | Front, Top, Bottom |
| Cable Management | Yes |
| Tool-free Design | Yes |
| Radiator Support | Front: up to 480/420 mm; Top: up to 360/420 mm; Rear: 120 mm; Bottom: up to 280/240 mm |
| Included Fans | 3 x 140mm Dynamic X2 GP-14 |
| Maximum GPU Length | 549mm |
| Cooling Support | Front: 3x 120/140mm, Top: 3x 120/140mm, Rear: 1x 120/140mm, Bottom: 2x 120/140mm, Side: 1x 120/140mm |
| Drive Bays | 6 x 3.5"/2.5" + 2 x 2.5" |
| Front I/O Ports | 1 x USB 3.1 Gen 2 Type-C, 2 x USB 3.0, 2 x USB 2.0, Audio I/O |
To Next Page