Frama EcoMail - Page 18

11. CONFORMITY DECLARATION
(corresponds to ISO/IEC Guide 22 and EN
45014)
We declare, with exclusive responsibility, that
all Frama Sensonic Franking Machines (EPS-
TS) conform with the following standards or
standardisation documents:
Safety:
IEC 950 (1991) 2nd edition without changes
/EN 60950 (1988)
EMV (EMC):
EN 55014 (1993) / VDE 0875 part 14
EN 55022 (1988) Class B/CISPR 22 (1985)
Class B
IEC 801-2 (1991) 2nd edition/prEN 55101-2
(1990): 4 kV CD, 8 kV AD
IEC 801-3 (1984)/prEN 55024-3 (1991):
3V/m
IEC 801-4 (1988)/prEN 55024-4 (1992):
1 kV
IEC 801-5 prEN 50142 (1993)
Low voltage requirement 73/23/EEC
EMV ordinance 89/336/ECC
Thomas P. Haug
CEO
Frama AG, CH-3438 Lauperswil
16
1996
229_Inha_OfficeMail:229_Inha_OfficeMail 30.4.2008 8:58 Uhr Seite 16
11. EC-DECLARATION OF
CONFORMITY
11. CONFORMITY DECLARATION
(corresponds to ISO/IEC Guide 22 and EN
45014)
We declare, with exclusive responsibility, that
all Frama Sensonic Franking Machines (EPS-
TS) conform with the following standards or
standardisation documents:
Safety:
IEC 950 (1991) 2nd edition without changes
/EN 60950 (1988)
EMV (EMC):
EN 55014 (1993) / VDE 0875 part 14
EN 55022 (1988) Class B/CISPR 22 (1985)
Class B
IEC 801-2 (1991) 2nd edition/prEN 55101-2
(1990): 4 kV CD, 8 kV AD
IEC 801-3 (1984)/prEN 55024-3 (1991):
3V/m
IEC 801-4 (1988)/prEN 55024-4 (1992):
1 kV
IEC 801-5 prEN 50142 (1993)
Low voltage requirement 73/23/EEC
EMV ordinance 89/336/ECC
Thomas P. Haug
CEO
Frama AG, CH-3438 Lauperswil
16
1996
229_Inha_OfficeMail:229_Inha_OfficeMail 30.4.2008 8:58 Uhr Seite 16
in accordance with the EEC low-voltage
directive 2006/95/EG in accordance with
appendix III B; of 12. December 2006
Hereby we explain that those corresponds to
below designated products in its conception
and design as well as in circulation the ex-
ecution the fundamental safety and health
requirements of the Community directive
low-voltage brought by us. In the case of a
change of the product not co-ordinated with
us this explanation loses its validity.
Manufacturer:
Frama AG
Dorfstrasse 6
CH-3438 Lauperswil
Description of the electrical equipment:
Product name: EcoMail / OfficeMail
Type: Franking System
The agreement with further valid guide-
lines/regulations following for the product
is explained:
EMC Directive (2004/108/EG) of
15. December 2004
Reference to the harmonised standards:
EN 60950-1:2006/AC:2011
EN 55014-1:2006 + A1:2009 + A2:2011
EN 55014-2:1997 + A1:2001 + A2:2008
EN 55022:2010
EN 55024:2010
EN 61000-6-1:2007
EN 61000-6-3:2007 + A1:2011
EN 61000-3-2:2006 + A1:2009 + A2:2009
EN 61000-3-3:2008
Lauperswil, 01/03/2014
Thomas P. Haug
CEO