Mounting
21
7.1 Electrical commissioning
NOTICE!
Use the attached electrical diagram to carry out the electrical
connections.
NOTICE!
When carrying out the electrical connection, make sure to
use the right operating voltage (see the nameplate).
Connect all external control and power cables to the corresponding
internal contacts, as shown on the electrical diagram.
BEWARE!
Risk of damages to the motor.
– Always connect the limit switches and/or a thermal
motor protection.
BEWARE!
Risk of damages to the motor.
– When operating the geared motor manually with the
crank handle, in no case exceed the limit switch
position.
Connecting the thermal motor protection makes sure, in the event
of overheating, that the power supply of the motor is switched off.
To Next Page
Loading...