INSTRUCTIONS FOR USE
FUNCTION SWITCH
Fig. 9
A. Lighting.
B. Ventilation mode. The fan runs at low
speed for 60 minutes.
C. Speed 1 on fan motor.
D. Speed 2 on fan motor.
E. Speed 3 on fan motor. If the button is
held down for 2 seconds, the fan goes
into intensive mode. After 7 minutes,
the fan motor returns to the previously
set position. The fan can be started and
stopped with the B-E buttons.
It is a good idea to turn on the cooker hood
before starting to cook, as this prevents
cooking smells spreading into the room.
Adjust the speed of the cooker hood de-
pending on the type of food you are prepar-
ing. If possible, allow the cooker hood to
run at a low speed for a few minutes after
you’ve finished cooking. You may also wish
to run the cooker hood on the low setting
when the oven is in use or after using the
dishwasher.
CARE AND MAINTENANCE
Cleaning
The cooker hood should be cleaned with a
damp cloth and washing-up liquid. With nor-
mal usage, the filters must be cleaned at
least every other month. Clean more often
after intensive use.
Fig. 10
Remove the grease filters by opening the
snap retainer, Fig. 10 Handle the filters ca-
refully, taking care not to bend them.
Soak the filter in a solution of warm water
and washing-up liquid. The filter can also be
washed in a dishwasher.
Refit the grease filters after cleaning, mak-
ing sure they snap firmly into place.
Fig. 11
The impeller, side grilles and fan interior
must be cleaned at least twice a year.
The motor core is removed by first discon-
necting the contact on the side of the mo-
tor unit, Fig. 11A. Rotate the latches, Fig.
11B, that lock the motor core in place. Pull
the unit outwards so that it is freed from
the pins, and then downwards.
Attention!
The motor core should not be washed or
exposed to moisture!
16
991.0357.897/D000000006703/180172/2021-09-30
To Next Page
Loading...
