24
Installation
Important: the installation must be done in compliance with established standards and regulations. It must
be done exclusively by a specialised and licensed technician.
Kitchen unit requirements
For build-in units, the components
(plastic materials and wooden ve-
neer) must be assembled with
heat resistant adhesive (max
100°C): unsuitable materials and
adhesives can result in warping
and failure of the adhesive. The
unit must allow sufficient room for
the electrical cabling. The unit
must be robust enough to support
the weight of the appliance. The
oven must be securely installed in
the compartment.
The oven may be installed in a col-
umn unit or underneath the top of
a modular unit, so long as suffi-
cient ventilation is provided.
560 mm
To Next Page
Loading...
Need help?
General