Franke FCS4039 - Page 25

08
04
4
02 03
4
4
01 02
01
03
4
4
4 4
4 4
4 4
4 4
05 06 07
Filling and emptying
Page 23
The quality of the milk may be impaired.
•Only clean containers should be fi lled with milk.
•Only use pre-cooled milk (2 - 5 °C or 36 - 41°F).
•Only touch the intake hose, the inside of the milk container and
the milk lid after sanitizing your hands, or wear disposable gloves.
•Place the container lid with the suction hose only on a surface
that is clean.
NOTE
Close the door.
Slide the milk container all the
way in.
Fit the container lid.
Fill the milk container with a
maximum of 5l of cooled milk.
Clean the milk container and
intake hose.
Remove milk container.The current cooling chamber
temperature is displayed.
Open the door and switch on
the FoamMaster.
Adding milk with FoamMaster (optional)
Slide in the milk container.
Insert the intake hose through
the opening in the cover.
Close the door.
Remove the lid.
Fill the milk container with milk
and seal it with the cover.
Open the door.
Pull intake hose out of the
machine.
Remove the milk container
towards the front.
Adding milk with MS1 (optional)
The quality of the milk may be impaired
•Only clean containers should be fi lled with milk.
•Only use pre-cooled milk (2 - 5 °C or 36 - 41°F).
•Only touch the intake hose after sanitizing your hands or wear
disposable gloves.
•Place the container lid with the suction hose only on a clean
surface.
NOTE