EN -44-
Accessories
Making ice cubes (Icematic)
• Take out the ice making tray
• Fill the water to the line.
• Place the ice making tray in its original position
• When ice cubes are formed, twist the lever to drop ice cubes into the icebox.
Note:
• Do not ll the icebox with water to make
ice. This may damage it.
• The movement of the ice maker may be
difcult while the refrigerator is running.
In such a case it should be cleaned by
removing the glass shelves.
Removing the Ice maker
• Remove the freezer glass shelves
• Remove the icemaker by pulling left or right
on the shelf.
You can remove the icemaker to increase the
available volume in the freezer compartment.
(In some models)
(In some models)
Ice tray
• Fill the ice tray with water and place in the freezer compartment.
• After the water has completely turned into ice, you can twist the tray as shownbelow to
remove the ice cubes.
To Next Page
Loading...
