What to do if my Franke 18012751 Refrigerator does not run?
If your Franke Refrigerator isn't running, first ensure the rocker switch is in the ON position. Also, check if the electronic controller has been turned off; if so, push and hold the power button (located in the top-right corner of the controller) for 5-7 seconds. Finally, inspect the circuit breaker and reset it if it has tripped.
Why is the product in drawers of Franke Refrigerator above the target temperature?
If the product in the drawers of your Franke Refrigerator is above the target temperature, it could be due to a high ambient temperature in the store. In this case, you should decrease the set point temperature of the controller. Also, make sure that the food has been pre-chilled before placing it in the drawers; otherwise, place the product into cold storage until its temperature is within food safety limits.
What to do if Franke 18012751 is running, but does not reach target operating temperatures?
If your Franke Refrigerator is running but not reaching the target operating temperatures, it could be due to a high ambient temperature in the store, decrease the set point temperature of the controller. Alternatively, the condenser coil might be dirty or clogged; in that case, use a soft bristle brush to clean the coils.
Why is frost building up on openings around drawers of Franke 18012751?
If you notice frost building up on the openings around the drawers of your Franke Refrigerator, it's likely that the door gaskets are either damaged or not installed correctly. Check the drawer gaskets to ensure they are correctly installed and free from cracks or damage.
Why product in drawers freezes in Franke 18012751?
If the product in the drawers of your Franke Refrigerator freezes, the set point temperature of the controller might be too low. Increase the set point temperature of the controller.
Explains symbols like DANGER, WARNING, CAUTION, NOTICE used in the manual.
Instructions to prevent electric shock, explosion, or arc flash from energized circuits.
Safety precautions for R-290 systems and general refrigeration hazards like flash freezing.
Warnings against unauthorized modifications and repairs to prevent unit malfunction.
Safety guidelines for lifting, sharp edges, tools, processes, and loose parts.
Identifies and lists key components of the 2-Drawer Refrigerator with their descriptions.
Step-by-step instructions for installing the 2-Drawer Refrigerator, including drawer removal/reinstallation.
Instructions on using the main power ON/OFF switch and its guard.
Guide to adjusting the unit's temperature using the digital controller.
Procedures for opening and closing the refrigerator drawers and daily cleaning.
Detailed steps for removing and reinstalling the refrigerator drawers.
Diagnosing and resolving issues like the unit not running or not reaching target temperatures.
Troubleshooting problems with product temperature, frost buildup, or freezing.
Details on the warranty coverage for Franke-manufactured components and exclusions.
Information on warranty coverage for equipment not manufactured by Franke.
General| Brand | Franke |
|---|---|
| Model | 18012751 |
| Category | Refrigerator |
| Language | English |
To Next Page