To Next PageTo Next Page
Need help?Do you have a question about the Franke FTC 6032 and is the answer not in the manual?
General| Width | 60 cm |
|---|---|
| Number of Speeds | 3 |
| Lighting Type | LED |
| Material | Stainless Steel |
| Type | Chimney Hood |
| Filter type | Aluminium |
Manufacturer not liable for installation errors. Minimum safety distance, voltage, earthing, exhaust pipe connection (Ø 120mm), and aeration are critical.
Details the physical dimensions, product components, and installation parts with their references.
Lists the included documentation, specifically the Instruction Manual.
Mounting the hood using screws, requiring drilling and a 150mm hole for the exhaust pipe.
Alternative installation by cutting a fitted opening and snapping the hood into place.
Using a provided element to close the space between the hood edge and the rear wall.
Connecting the hood to a chimney with a Ø 150mm pipe and fixing it with clamps.
Cutting a hole for recirculation, connecting the outlet with a pipe, and fixing the grille.
Connecting the hood to the mains via a two-pole switch with a contact gap of at least 3mm.
Operating the lighting system on and off.
Switching the extractor motor on and off.
Setting the operating speed for continuous, optimal, or maximum air change.
Cleaning metal cassette grease filters every 2 months, which can be washed in a dishwasher.
Replacing non-washable charcoal filters every four months or more frequently with heavy use.
Instructions for replacing light bulbs, specifying removal of grease filters first.
Table detailing lamp power, socket type, voltage, dimensions, and ILCOS codes for replacement.
