01
02
WIND RATING
ECLIPSE
CANTILEVER UMBRELLAS ARE ENGINEERED TO WITHSTAND
35MPH SUSTAINED WINDS AT AN OPTIMAL 90° ANGLE. THE ADDITION OF
THE WIND STABILIZER KIT INCREASES THIS TOLERANCE BY 5MPH.
DO NOT ATTEMPT TO OPEN OR UTILIZE THE TILT FEATURE AT ANY DEGREE
OF TILT IN WINDY CONDITIONS.
Frankford Umbrellas have been tested successfully in extreme weather and winds, however, we
strongly recommend closing your umbrella when not in use, or in moderate sustained winds.
Wind ratings do NOT form part of, nor fall under, any Frankford Umbrellas’ warranties. Wind ratings are
intended as a guide to the relative strength of the umbrellas only and tested at their optimal 90° and non-
tilted positions. Umbrellas with any degree of tilt added should not follow the above wind ratings. Wind can
be extremely variable, depending on the surroundings, elevation, angle of gusts, etc. In any high wind or
sudden extreme weather conditions, all umbrellas should be closed and secured immediately.
Frankford can recommend specific bases and anchoring systems for specific umbrella types. However,
these are only recommended weights, as dierent environments may require dierent base options. Please
contact us for assistance in choosing the proper umbrella base or anchoring system.
In the event Frankford shade products are left open and/or unattended in harsh weather conditions, our
customer service department is here to help you and promptly assist with parts for repairs. Our shade
products oer modular, self-repairable components which allow customers to service the umbrellas to keep
them in perfect working condition.
02
• GRUB-SCREWS ARE IN PLACE TO KEEP THE THREADED HOLES CLEAN AND
FREE FROM DIRT, SAND ETC.
• ONCE YOUR BASE IS IN PLACE, USE THE SUPPLIED ALLEN KEY TO REMOVE
ALL GRUB-SCREWS BEFORE INSTALLING THE UMBRELLA.
BEFORE INSTALLING
• YOU MAY RECEIVE ADDITIONAL MOUNTING HARDWARE WITH YOUR
UMBRELLA THAT IS NOT NEEDED FOR YOUR SPECIFIC MOUNTING
SELECTION.
• DO NOT DISCARD THIS ADDITIONAL MOUNTING HARDWARE IN CASE YOU
DECIDE TO CHANGE YOUR MOUNTING OPTION IN THE FUTURE.
THE FUNCTION OF GRUB-SCREWS ARE ONLY TO PROTECT THE THREADS IN WAREHOUSE STORAGE
AND SHIPPING. ONCE REMOVED, PLEASE DISCARD AND DO NOT LEAVE IN THE BASE. THEY ARE NOT
CORROSION RESISTANCE AND WILL RUST IF EXPOSED TO THE ELEMENTS.
To Next Page
Loading...
