• Theicemakershouldnot belocatednexttoovens,grillsor othersourcesofhighheat.
• Theicemakermustbeinstalledwith all electrical,wateranddrainconnectionsin
accordancewith stateandlocal codes.A standardelectricalsupply(115VAC only,
60Hz, 15A), properlygroundedin accordancewith theNationalElectricalCodeand
localcodesandordinancesisrequired.
• Do notkink or pinchthepowersupplycordor drainlinesbetweentheicemakerand
the cabinet.
• Thefuse(or circuit breaker)sizeshouldbe15amperes.
• It is importantfor theicemakerto beleveledin orderto workproperly.You may
needto makeseveraladjustmentsto levelit.
• All installationsmustbein accordancewith localplumbingcoderequirements.
• Makecertainthatthehosesarenotpinchedor kinkedor damagedduringinstallation.
• Checkfor leaksafterconnection.
• Neverallow childrento operate,playwith or crawlinsidetheicemaker.
• Althoughtheunit hasbeentestedatthefactory,dueto long-termtransitandstorage,
the first batchof cubesmustbediscarded.
• Neverturnthewatersupplytapoffwhen theicemakeris working.
• If theicemakerwill not beusedfor alongtime,beforethenextuseit mustbe
thoroughlycleaned.Follow carefullyanyinstructionsprovidedfor cleaningoruseof
sanitizingsolution.Do not leaveanysolutioninsidetheicemakeraftercleaning.
• DO NOTtouchthecondenserfins.Thecondenserfins aresharpandcanbeeasily
damaged.
• DO NOTusesolvent-basedcleaningagentsor abrasivesontheinterior.These
cleanersmaytransmittasteto theicecubes,or damageor discolortheinterior.
• Theicemachinecleanercontainsacids.DONOT useor mix with anyother
solvent-basedcleanerproducts.Userubberglovestoprotecthands.Carefullyreadthe
materialsafetyinstructionson thecontainerof theicemachinecleaner.
• Do notusethis apparatusfor otherthanits intendedpurpose.
SAVE THESE INSTRUCTIONS
Electrical Connection
Do not, under any circumstances, cut or remove the third (ground) prong from the power
cord. For personal safety, this appliance must be properly grounded. The power cord of
this appliance is equipped with a 3-prong grounding plug that mates with a standard
3-prong grounding wall outlet to minimize the possibility of electric shock hazard from
the appliance. Have the wall outlet and circuit checked by a qualified electrician to make
sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered,
To Next Page
Loading...
