Need help?Do you have a question about the Franklin Electric SubDrive15 Connect N3R and is the answer not in the manual?
General| Brand | Franklin Electric |
|---|---|
| Model | SubDrive15 Connect N3R |
| Category | Controller |
| Language | English |
Crucial safety guidelines and cautions for installation and operation.
Overview of the mobile app for drive monitoring and advanced settings.
Details on motor overload protection, branch circuit, battery handling, and Wi-Fi compliance.
Provides consistent pressure regulation by adjusting motor speed based on demand.
Allows for smaller pressure tanks and potentially smaller pumps due to variable speed control.
Reduces output power in extreme temperatures to prevent shutdown and damage.
Features for smoother motor startup and efficient power usage.
Monitors motor output for current leaks to ground, indicating a fault.
Configurable setting to detect underload conditions and prevent nuisance trips.
Provides outputs for system run status and fault conditions.
Details on analog pressure transducer, Wi-Fi, Aux input, drawdown, and duplex alternator.
Information on replacing the cooling fan and enhanced pressure input board.
Lists all components included with the SubDrive/MonoDrive unit.
Explains the four main components of the system and their interaction.
Visual representation of the system's electrical connections.
Describes information shown on the drive's display during different operating states.
Recommendations for selecting an optimal installation location based on environmental factors.
Specific guidelines for installing the NEMA 3R enclosure outdoors against elements.
Guidelines for routing wires to minimize electromagnetic interference.
Essential safety procedures for proper system grounding.
Tables and guidance for selecting appropriate circuit protection and wire gauges.
Recommendations for selecting a generator to power the system.
Guidance on selecting pressure tank size and supply pipe diameter.
Performance characteristics and sizing for SubDrive15, 20, 30, and 50.
Performance characteristics and sizing for MonoDrive and MonoDriveXT.
Instructions and dimensions for securely mounting the controller unit.
Detailed steps for connecting power and motor leads to the controller.
Wiring instructions for duplex alternator, moisture sensor, and auxiliary input.
Initial configuration using DIP switches for basic setup.
DIP switch settings for matching motor and pump horsepower.
Setting up the pressure sensor type and desired system pressure.
Adjusting sensitivity for detecting underload conditions.
Enabling a feature to improve response in specific system configurations.
Steps to establish a Wi-Fi connection between the drive and a mobile device.
Navigating the FE Connect app for drive configuration and parameter adjustment.
Setting up two drives to work together for alternating pump operation.
Configuring external inputs for control and water detection.
Real-time system monitoring and viewing fault/configuration history.
List of optional accessories available for the drive system.
Technical specifications for MonoDrive and MonoDriveXT models.
Technical specifications for SubDrive15 and SubDrive20 models.
Technical specifications for SubDrive30 and SubDrive50 models.
Reference guide for identifying and understanding fault codes.
Quick reference for diagnosing common conditions and issues.
Terms and conditions of the product warranty.
To Next Page
