Frecon FIA-L150 - User Manual

FRECON, spol. s r.o. Hodkovická 115, 142 00 Praha 4, CZECH REPUBLIC
tel.: +420-241 71 32 44-45 fax: +420-241 72 10 52 E-mail: info@frecon.cz http://www.frecon.cz
FRECON
FIA-L18, 37, 55, 75, 110, 150, 220, 250
PROGRAMMABLE SPEED DRIVES
FOR
STANDARD AC INDUCTION MOTORS
0,18kW TO 2,5kW
INSTALLATION AND USER MANUAL

Summary

Safety Precautions

Mechanical installation

Location

Mounting

Electrical installation

Power connections

Safety precautions and procedure for connecting power supply.

Connection procedure

Step-by-step guide for making power connections, emphasizing safety.

Recommended protection devices

Guidance on selecting upstream protection devices and cable sizes.

Motor connection

Recommendations for connecting the motor, including cable types and length considerations.

Motor speed

Discusses operating the motor at different speeds and associated risks.

Control connections

Instructions for connecting control signals and specifications of inputs/outputs.

Drive status indication

Operating procedures

Procedure I - Remote control

Steps for controlling the drive remotely using external signals.

Speed control (Procedure I)

Run;stop control (Procedure I)

Fwd;rev - Forward;reverse (Procedure I)

Procedure II - TELECONTROL

Steps for remote control using the TELECONTROL unit.

Speed control (Procedure II)

Run;stop control (Procedure II)

Forward;reverse control (Procedure II)

Drive status indication (Procedure II)

Procedure III - Local control

Steps for controlling the drive locally using the MINITERMINAL.

Reset of the drive after a trip signal

Frecon FIA-L150 Specifications

General

Brand	Frecon
Model	FIA-L150
Category	Engine
Language	English