Frecon FIA-L18 - User Manual

FRECON, spol. s r.o. Hodkovická 115, 142 00 Praha 4, CZECH REPUBLIC
tel.: +420-241 71 32 44-45 fax: +420-241 72 10 52 E-mail: info@frecon.cz http://www.frecon.cz
FRECON
FIA-L18, 37, 55, 75, 110, 150, 220, 250
PROGRAMMABLE SPEED DRIVES
FOR
STANDARD AC INDUCTION MOTORS
0,18kW TO 2,5kW
INSTALLATION AND USER MANUAL

Summary

SAFETY PRECAUTIONS

2. General characteristics

4. Mechanical installation

4.1. Location

4.3. Mounting

5. Electrical installation

5.1. Power connections

Outlines essential checks and procedures for making power connections to the drive terminals.

5.1.1. Connection procedure

Provides step-by-step instructions for connecting power, emphasizing safety, including earth connection first.

5.1.2. Recommended protection devices installed upstream of the drive and cabling

5.1.3. Motor connection

Guidance on connecting the motor, including cable length considerations and screened cable usage.

5.2. Motor speed

5.3. Control connections

Details how to connect control cables and provides specifications for inputs and outputs.

5.3.1. Connection procedure

Step-by-step instructions for connecting control cables, emphasizing segregation from power cabling.

5.3.2. Specifications of control inputs and outputs

7. Operating procedures

7.1. Procedure I - remote (external) control, without using MINITERMINAL (control pod) and TELECONTROL (remote control unit)

Guides on performing remote control operations using external switches or PLC outputs.

7.2. Procedure II - remote (external) control, using TELECONTROL - remote control unit (option)

Instructions for operating the drive remotely using the optional TELECONTROL unit.

7.3. Procedure III - local control, using MINITERMINAL (control pod)

8. Reset of the drive after a trip signal

Frecon FIA-L18 Specifications

General

Compression Ratio	8.5:1
Cooling System	Air-cooled
Fuel System	Carburetor
Engine Type	Single cylinder, 4-stroke, air-cooled
Starting System	Recoil start