Free2Move eSolutions easyWallbox - Page 333

11
2.3. Essential safety instructions
easyWallbox was designed, built and checked in compliance with the current
safety regulations. Plug&Play installation of easyWallbox can be made directly
by users capable of understanding and following carefully the present
instructions and able to evaluate and understand all related risks. Free2Move
eSolutions S.p.A. does not assume any liability for damage to persons or things
that may arise from failure to respect the safety regulations and the instructions
in this manual.
2.3.1. Respect for local conditions
The operational safety of easyWallbox depends on its correct installation which
must respect current legislation.
Incorrect installation may cause danger such as serious injury
or death.
2.3.2. Respecting the supervision requirement
Children and people not able to evaluate, even momentarily, the possible risks
arising from the incorrect use of easyWallbox must be kept away from the
device and the charging cable, both when in use and non-operational.
2.3.3. Regulatory status
easyWallbox must be maintained intact. If there is any damage or defects,
users run the risk of serious injury caused by electric shocks.
Therefore, follow the instructions below:
 avoid knocking the device
 avoid use not in accordance with the intended purpose
 incorrect use of the device
 clearly indicate the malfunction of the device so that other people will not
use it
 ask for the prompt intervention of qualied personnel to repair
damage or defects.
Use of easyWallbox during a strong thunderstorm is not
recommended.