17
3.4. Dynamic Power Management
easyWallbox includes Dynamic Power Management (DPM), a smart function
that modulates the charging power according to power availability, thus
avoiding unpleasant blackouts.
To activate the Dynamic Power Management, please check the Installer Manual
(see www.esolutionscharging.com / www.easywallbox.eu ) on installation of
the sensor on the power supply and setting up the parameters.
easyWallbox can work even without Dynamic Power Management; in this case,
the installation of a dedicated sensor is not necessary, but avoidance of
blackouts is not ensured.
Connection of the Dynamic Power Management sensor must be
installed by a professional in accordance with local regulations.
We recommend contacting qualied personnel or specialised service
for any questions or doubts concerning easyWallbox’s use, installation,
and maintenance (see Chapter 11 - Assistance).
281175 code
METER
CURRENT
SENSOR
ELECTRICAL SWITCHBOARD
To Next Page
Loading...
