22
4.4. Opening the package
When the box is opened, check that the various parts of easyWallbox do not
show signs of physical damage caused by knocks, lacerations or abrasions.
If damage is detected installation must be interrupted immediately and the
type of damage reported to the seller. If necessary, contact assistance as
explained in 11.
The individual components of the device are protected by PVC packaging and
sealed with adhesive tape. When the box is opened, the parts should be
cleaned to remove any dust, PVC residues or portions of adhesive tape.
easyWallbox must only be taken from the box when everything has been
prepared for the installation and it must be transported manually to the wall
chosen for its installation.
When easyWallbox is moved manually, do not trip on the power
supply cable of the vehicle.
Closed box containing
easyWallbox
Opening the lid of the box
containing easyWallbox
Raising the panel in
the box with easyWallbox
To Next Page
Loading...
