Free2Move eSolutions eProWallbox Move - Operating Mode

175
 Operating mode
On the App, go to wallbox settings and click on Autostart button, to disable or enable the
authentication mode. The 3 operating modes are the following:
 Autostart connected (default Factory setting): Connected to eSolutions control platform
for charging without using an RFID or Remote Start via the App
 Autostart not connected: Not connected to eSolutions control platform and charging
without using an RFID card or Remote Start via the App
 Authentication connected: Connected to eSolutions control platform, charging using
authorized RFID card or Remote Start via the App





