Free2Move eSolutions ProWallbox Move - Operating Mode

12
 Operating mode
On the App, go to wallbox settings and click on Autostart butt
on, to disable or enable the
authentication mode. The 4 operating modes are the following:
1. Autostart connected (default Factory setting): Connected to eSolutions control platform for
charging without authentication
2. Autostart not connected: Not connected to eSolutions control platform and charging
without authentication
3. Authentication connected: Connected to eSolutions control platform, charging using the
App to authenticate
4. Authentication not connected: Not connected to eSolutions control platform, charging using
the App to authenticate
For Business application eProWallbox Move can be also connected to a Charge Point
Management System (CPMS), a web based platform with roaming integration for the remote
management and monetization of the charging points.
For further details check the eSolutions website esolutionscharging.com
If you change operating mode, restart the wallbox via the app to make the changes
effective