Turn on the headset.
Press and hold the ‘Call’ button for 2 seconds. Release the button when the LED flashes 3
times and ‘Power on’ voice notification can be heard in the speaker.
Turn off the headset.
Press and hold the ‘answer’ button for 3 seconds. Release the button when the LED flashes
red 3 times and ‘Power off” voice notification can be heard in the speaker.
Before using the headset, it must be paired and connected to another Bluetooth source
device, such as a mobile phone or the BTD1000 dongle. For pairing instructions of Bluetooth
source device, check the user guide of the device.
General procedure to pair to your smartphone
⚫ Turn on Bluetooth on your phone.
⚫ Put the headset in pairing mode.
◼ make sure the headset is powered on.
◼ Press and hold the mute button for 1 second until the LED flashes.
◼ When it goes to pairing mode, voice notification can be heard.
⚫ Perform a search for Bluetooth devices on your smartphone.
⚫ Connect to BT-700 when it is found.
⚫ Blue LED is On and ‘Pairing successful. Connected’ voice notification can be heard in the
speaker when pairing is completed.
Different phones have different ways to handle Bluetooth devices. Read the users manual of
your phone for more information. Some phones will connect to the headset automatically
when it is in range or when you return to your office. For other phones, it may be necessary to
To Next Page
Loading...