reconnect manually when the connection has been lost.
The pairing mode is active for 10 minutes. After that, the headset will enter standby mode. If
you want to cancel the pairing mode, press call button and then “Pairing Cancel.” Voice
notification can be heard.
..
The default firmware version has 10 different language voice prompts. They are English,
Spanish, French, German, Italian, Dutch, Russian, Danish, Swedish, and Norwegian.
To select languages, the headset should not yet be paired or connected to a Bluetooth device.
Press the “volume up/down” button for more than 2 seconds and the next available language
will be heard. If announced languages want to be used, just leave it.
Answer a call.
⚫ Press the ‘Call’ button shortly.
Reject a call.
⚫ Press the ‘Call’ button for 1 second when incoming call is ringing, and ‘Call rejected’
voice notification can be heard in speaker.
Make a call.
⚫ Input numbers on the mobile phone and press the ‘Call” button shortly.
End a call.
⚫ Press the “Call” button shortly or end the call on the mobile phone.
To Next Page
Loading...