To Next PageTo Next PageWhat to do if GPS LED is flashing slowly on FreeFlight Receiver?
If the GPS LED on your FreeFlight Receiver is flashing slowly, it means the GPS is acquiring satellites. Allow 2-3 minutes for GPS tracking. Also, check the GPS antenna and check the GPS for any problems.
What does it mean if ST LED is on in FreeFlight ADS-B FDL-978?
If the ST LED is illuminated on your FreeFlight Receiver, it indicates a fault with the unit. Check Controller Warning messages to identify the specific issue.
General| Brand | FreeFlight |
|---|---|
| Model | ADS-B FDL-978 Series |
| Category | Receiver |
| Language | English |
Provides an overview of the ADS-B FDL-978 Series and Lite Series Installation Manual.
Defines technical terms and abbreviations used throughout the manual for clarity.
Explains the meaning and usage of warning, caution, and note symbols in the document.
Describes the functionality and features of the FDL-978 Series and Lite Series systems.
Details the technical specifications including TSO compliance, dimensions, and power requirements.
Lists the part numbers for the FDL-978 Series units and optional installation kits.
Specifies additional materials and equipment necessary for a complete installation.
Provides instructions for unpacking and visually inspecting the equipment for damage.
Details guidelines and dimensions for physically mounting the FDL-978 series units.
Explains the pinouts and wiring for the DB-44 power and I/O connector.
Provides detailed information on power input, personality module, and status LEDs.
Offers recommendations for selecting and installing UAT antennas for optimal performance.
Provides guidelines for selecting and installing GPS antennas, considering aircraft structure.
Specifies limitations for compliant installations according to TSO and FAR requirements.
Steps to perform before final installation to verify system readiness and connections.
Details the methods for system installation setup and configuration using MPI or TC978.
Introduces the Maintenance Port Interface (MPI) module and its functionalities.
Guides on configuring the system via the MPI using terminal programs or Wi-Fi.
Explains the procedures for configuring the FDL-978 series using the TC978 controller.
Provides an introduction to troubleshooting problems encountered with the installed systems.
A guide to diagnosing issues using the FDL-978-XVR unit's status LEDs.
Details warning messages displayed by the TC978 controller and their potential causes.
Lists the environmental qualifications for the FDL-978 Series equipment per RTCA/DO-160.
Lists the environmental qualifications for the TC978 Controller per RTCA/DO-160.
Specifies the data format for input from external altitude encoders.
Specifies the data format for input from Air Data Computers/Sensors.
Provides physical dimensions for the FDL-978 Series and TC978 controller.
Details the mounting and instrument cut-out options for the TC978 controller.
Presents common wiring diagrams for popular FDL-978 system configurations.
Provides an overview of the FDL-978 Lite Series transceiver and transmitter.
Details technical specifications for the Lite Series transmitter and transceiver.
Lists the parts included in the FDL-978 Lite Series ship kits.
General information for installing the FDL-978 Lite Series into an aircraft.
Details the pinouts and electrical connections for the Lite Series units.
Covers setup and configuration items for the FDL-978 Lite Series.
Explains how to configure the FDL-978 Lite Series using the TC978 controller.
