What to do if GPS LED is flashing slowly on FreeFlight Receiver?
If the GPS LED on your FreeFlight Receiver is flashing slowly, it means the GPS is acquiring satellites. Allow 2-3 minutes for GPS tracking. Also, check the GPS antenna and check the GPS for any problems.
What does it mean if ST LED is on in FreeFlight Receiver?
If the ST LED is illuminated on your FreeFlight Receiver, it indicates a fault with the unit. Check Controller Warning messages to identify the specific issue.
Why is my TX LED not active on FreeFlight ADS-B FDL-978-XVR Receiver?
If the TX LED on your FreeFlight Receiver isn't active, it means the unit isn't transmitting ADS-B messages. To resolve this, check the antenna connections and check the Controller Warning messages for further details.
Why is my RX LED not active on FreeFlight Receiver?
If the RX LED on your FreeFlight Receiver is not active, it indicates that the unit isn't receiving ADS-B messages. Check the antenna connections and check Controller Warning messages.
How to fix a GPS fault on FreeFlight ADS-B FDL-978-XVR Receiver when ST LED is flashing quickly?
If the ST LED on your FreeFlight Receiver is flashing quickly, it indicates a GPS fault. Check the GPS connection and configuration, and also check Controller Warning messages.
What to do if GPS LED is flashing quickly on FreeFlight ADS-B FDL-978-XVR Receiver?
If the GPS LED on your FreeFlight Receiver is flashing quickly, it means the GPS is reporting a fault. Check the GPS for the fault.
How to troubleshoot a FreeFlight ADS-B FDL-978-XVR Receiver with no LED activity?
If there is no LED activity on your FreeFlight Receiver, it indicates a power issue. Verify that the power is turned on and check the power connections to the unit.
What to do if GPS LED is off on FreeFlight ADS-B FDL-978-XVR Receiver?
If the GPS LED is off on your FreeFlight Receiver, it indicates that the GPS is not communicating. Check the GPS connection and the installation configuration.
Details on how to make the necessary electrical connections for the system.
Explains the various interface details, including power input, LEDs, and modules.
Details the system setup and configuration process using MPI or TC978 Controller.
Explains how to configure the MPI hardware using terminal programs or Wi-Fi.
Guides the user through configuring the system using the TC978 controller interface.
Provides a quick reference guide for troubleshooting issues using the FDL-978-XVR LEDs.
Lists and explains warning messages that may appear on the TC978 Controller during operation.
Presents wiring diagram examples for common FDL-978 system configurations.
Provides general installation guidance for the FDL-978 Lite Series into an aircraft.
Details the electrical connection pinouts for the FDL-978 Lite Series.
Refers to configuration and checkout procedures, linking to Sections 3.1 and 3.2.
Details installation setup and configuration items for the FDL-978 Lite Series.
Guides system configuration and setup using the TC978 controller for the Lite Series.
Refers to troubleshooting information, linking to Section 4.
General| Frequency | 978 MHz |
|---|---|
| ADS-B Standard | UAT |
| Type | ADS-B Transceiver |
| Interface | RS-232 |
| Antenna | External antenna required |
To Next Page
