Then connect the power. When charger is connected the Red light will glow
continuously, showing Freego is in charge mode.
The charger has two indicators; the red light means on charge and the green
light means fully charged, stop charging. The input voltage of charger is
110-240v, Output voltage is 37-39v, AC electric current is 1.2-1.5 A, The
charger takes 8-10 hours to fully charge. When fully charged the green light
will be on continuously.
The charging electric current will then decrease output. The charger will
become warm when charging, so please keep in suitable place.
Picture 15
Please keep power switch of Freego off when on charge, otherwise,
Freego will cause power consumption, which is bad for charging.
CHAPTER V
Maintenance
All other items that are not mentioned below should be done by a
professional person or technician
1. The Maintenace of Battery
Freego use BTM free maintenance battery. When you find the orange lamp
and red lamp light are continuously on. Please charge. Keep the charging
time to no more than 15 hours. If you are not using Freego for long periods,
keep it charged, excessive discharge and re-charge is bad for the battery’s
life and can even lead to having to scrap the battery. (Suggestion: please
keep it charged every month even you don’t drive it)
2. When not driving Freego
To Next Page
Loading...
