Instruction for remote switch
Each
Freego comes with a remote switch in its package, which has following functions
when Freego was powered on:
1. Lock: You can lock Freego by pressing this button before you power off Freego,
2. Unlock & enable & disable towing: If you power the Freego F3 on correctly and
found no action after you pressed the pedal switch, your Freego may be locked,
you can press this button to unlock it. Then press again to enable towing mode
when you have to pull Freego through, same button to cancel.
3. Speed setting: you can set speed limit by this button, 3 beeping means 18km/h, 2
means 12km/h, 1 means 8 km/h.
4. LED flash lights switch: You can turn on and off the front and rear LED flash
lights by press this button.
Please keep the remote switch carefully to avoid lost, if you lost it, please send an
email or call up our distributor in your country to get a new one and learn to match
code.
To Previous Page
Loading...
