forward slowly. It is dangerous to lean forward suddenly; this is just like
sudden acceleration when driving a car.
Picture 11
3. Breaking and Driving Backward
Driving backward is not recommended for the driver’s safety, because it is
hard for you to see behind when driving. Freego turning radius is zero,
which you can easily achieve in a continuous spin around 360 degrees on
the spot. When you drive forward in a straight line and you want to slow
down or stop, you can lean backward or squat down (the center of gravity
backward). Lean slowly or smoothly backward is helpful for slowing down
and stopping safely (refer to picture 12).
Picture 12
Tip: Driving forward in a straight line you just simply push the handle
forward, then backward to slow down or stop.
4. Turning at Original Place, Turn Around and Rotate 360
It is easy to turn the Freego when driving. keep the turn pipe / handle bar
left-forward or right-forward to the end, at the same time keep your body
corresponding, left-forwarded or right-forwarded as the trend of Freego
(refer to picture 13 and 14).Thus you can easily achieve various turns. When
To Next Page
Loading...
