MODEL: PFR2190
GENERAL SAFETY RULES
UNPACKING
FEATURES
OPERATION
ADJUSTING THE EXHAUST
LOADING FASTENERS
UNLOADING FASTENERS
CLEARING JAMS
NO-MARRING PAD
SEITING THE AIR PRESSURE
DEPTH ADJUSTMENT
FIRING THE TOOL
MAINTENANCE
RECOMMENDED HOOKUP
TROUBLE SOLVING
WEARING PARTS
WARNING:
RE€man
MODEL: PFR2190
SAVE THIS MANUAL
Keep this manual for the safety wamings
and precautions, operating, inspection,
maintenance. Keep this manual and the
receipt in a safe and dry place for future
reference.
SYMBOLS
RE-eman
A WARNING:
To avoid serious personal injury. do not
attempt to use this product until you read
thoroughly and understand completely
this manual. Save this manual and review
frequently for continuing safe operation
and instructing others who may use this
In this manual, on the labels, packages and all Other information provided with this tool. The following
signal words and meanings are intended to explain the levels of risk associated with this tool.
SYMBOLS SIGNAL
WARNING:
CAUTION:
CAUTION:
MEANING
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
(Without symbol) Indicates a situation that may result in
property damage.
The warnings and precautions discussed in the manual cannot cover all possible conditions and
situations that may occur. It must be understood by the user that common sense and caution are
factors which cannot be built into this product, but must be supplied by the user.
GENERAL SAFETY RULES
WORK AREA
Keep the work area clean and well lighted.
Cluttered benches and dark areas increase the
risks of accidents.
Do not operate the tool in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. The tool
creates a spark which may ignite flammable
liquids,gases or dust.
Keep bystanders, children, and others away
while operating the tool. Distractions could
result in improper use and cause injury.
Avoid unintentional misfires. Always use
caution to avoid accidentally firing. Do not point
towards yourself or anyone whether it contains
fasteners or not.
PERSONAL SAFETY
Always wear eye protection. Operator and
others in the work area should always wear
ANSI—approved safety goggles with side
shields. Eye protection is used to guard against
flying fasteners and debris, which may cause
severe eye injury, You can use the goggles
packed with the tool.
Always wear hearing protection when
using the tool. Prolonged exposure to high
intensity noise may cause hearing loss.
Use safety equipment. A dust mask, non—skid
safety shoes and a hard hat must be used for
the applicable conditions. Wear a full face shield
ifyou are producing metal filings or wood chips.
Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be
caught in moving parts.
Stay alert, watch what you are doing and
use common sense when operating a
power tool. DO not use tool while tired or under
the influence of drugs, alcohol, or medication. A
moment of inattention while operating the tool
may cause serious injury.
Avoid unintentional firing.Keep fingers away
from trigger when not driving fasteners,
especially when connecting the tool to the air
supply.
Keep proper footing and balance at all times.
Proper footing and balance enables better
control of the tool in unexpected situations.
Do not use on a ladder or unstable supports.
Stable footing on a solid surface enables better
control of the tool in unexpected situations.
Make sure the hose is free of obstructions
or snags. Entangled or snarled hoses can
cause loss Of balance or footing and may
become damaged, resulting in possible injury.
HTTP://WWW.FREEMANTOOLS.COM
1-888-669-5672
HTTP://WWW.FREEMANTOOLS.COM
1-888-669-5672
01
To Next Page
Loading...
