1. Download and install IAR Embedded Workbench for ARM V6.4.20 or later, 30-day
evaluation license: http://www.iar.com/en/Products/IAR-Embedded-Workbench/ARM/
2. Load the OpenSDA Debug Application using the following steps:
• Enter FRDM-KL25Z in Bootloader mode using procedure 2-1
• Drag/drop or copy/paste the application file DEBUG-APP.SDA available in the “SDA
application” folder from the FRDM-KL25Z_v1.00 zip file to the “BOOTLOADER” drive
• Unplug the USB cable and plug it in again
• Windows should detect three new
devices including “PeMicro OpenSDA Debug
driver” and ”OpenSDA – CDC Serial Port”
and install automatically the right driver
Getting Started with IAR Embedded Workbench for ARM
and install automatically the right driver
• Check in Windows device manager that
Jungo/PEMicro OpenSDA Debug Driver and
Ports (COM & LPT)/OpenSDA-CDC Serial Port were correctly detected
Preliminary
To Next Page
Loading...
