5
SET UP INSTRUCTIONS
1. Park your vehicle on a suitable fl at piece of ground, free from
overhanging trees or branches. Ensure that the hand brake is
engaged and the vehicle is in gear or park for automatics.
2. Undo the 2 webbing straps on the PVC cover. Remove the
PVC travel cover from the tent by unzipping around three
edges and slide the remaining edge from the rope track.
Keep the PVC cover on until the set up is fi nished.
3. Release the hold-down velcro straps on each side of the tent.
4. Slide out the ladder until the locking pins engage. The ladder
can now be used as a lever to open the tent.
5. Pull down on the ladder, which will now lift the top half of
the tent. Make sure that the two halves of the tent engage
properly and the tent fl oor is fl at.
6. Check to make sure that the ladder is positioned securely on the
ground, free from rocks, sticks and obstructions, so as to support
the free half of the tent.
Special Note: Although the tent structure is able to support
itself in an emergency, the ladder is required for support at
all the times for normal use.
To Next Page
Loading...