9
Before first use:
1. Read all the points in the paragraph ’Safety instructions’.
2. Unfold the product:
´ a) Press the folding lock.
´ b) Lift up the supported pole, step on the foot plate in the
same time till hear a click-sound, which show the E-scooter is
unfolded totally.
´ c) Press and lock the folding button.
3. Install the dashboard and handle.
´ d) Unpack the packing material firstly. Carefully insert the
dashboard to the right handle, press down the location pin of
handle to go through the dashboard.
´ e) Use the included wrenches to lock the screws in the
dashboard tightly.
´ f) Insert two handles into the front pole, and make sure the
location pin is locked in place.
´ g) Use the included wrenches to lock the screws in the front
pole tightly.
Note: Regularly check the handle or front pole, if found loose or
shaking, lock the screws in the front pole tightly.
4. Connect the power adapter to the charging port and wall outlet,
the indicator on the adapter will illuminate in red.
Note: Connect the power adapter to charging port firstly.
5. When the charging is completed, the indicator on the adapter
will illuminate in green.
Operation
To Next Page
