11
Operation
Folding the E-scooter
1. Make sure that the electric scooter is turned off, open the
folding lock.
2. Push down the base pole and fix the folding hook to the
folding lock.
3. To unfold, press the folding hook to release and follow the
folding step reversely to unfold the E-scooter.
Adjusting the brake:
1. Use the M5 hex wrench anti-clockwise to release the
plate screws on back wheel, adjust the length of exposed
tail, shorten for tighting and lengthen for loosing the
brake.
2. Lock the pressure plate screws by rotating clockwise.
Fix the handle:
´ If the front pole is loose or shaking, please use the
M5 hex wrench to lock the two screws at the folding
mechanism.
Maintenance:
1. Wipe the exterior with a damp sponge.
Note: Do not use any abrasive cleaning or scouring
products. This may damage the surfaces.
2. Wipe the wheels with a damp sponge to remove any dirt.
Storage:
´ Store the scooter where it is not exposed to moisture,
dust, direct sunlight, extremely high or low temperatures.
´ Store the scooter out of reach from children.
Charge the product before storing for a long
time and charge it every 1 month to maintain
the battery.
To Next Page
Loading...
