2. Apply a small amount of epoxy to one 3. Apply a small amount of epoxy to the vertical
of the horizontal stabilizers. stabilizer slot for the horizontal stabilizer
an
d glue it in place. Repeat for other side.
4. Check that horizontal stabilizers are 5. Apply 5-minute epoxy to the root of
at 90 degrees to the fin. one wing panel.
6. Apply 5-minute epoxy to the wing tabs 7. Attach and hold the wing in place until
on the fuselage. the epoxy cures. Repeat for other wing.
F9F Panther
Item No.:F1701
-3-
To Next Page
Loading...
