IMPORTANT: After performing all operations in this
table, perform all daily and weekly maintenance op-
erations listed in the "Pretrip Inspection and Daily
Maintenance" chapter of the
Business Class Trucks
Driver’s Manual
.
NOTE: Numbers in this table are maintenance opera-
tion reference numbers matching those in the text of
this manual.
M1 Maintenance Interval Operations
Maint.
Oper. No.
M1 Maintenance Interval Operations
00–15 Lubrication and Fluid Level Check (all but FL112, includes the following):
• Clutch Release Bearing and Cross-Shaft Lubricating
• Hydraulic Fluid Level Checking
• Manual Transmission Oil Level Checking
• Fifth Wheel Lubricating
• Suspension Lubricating
• Knuckle Pin Lubricating
• Tie-Rod End Lubricating
• All-Wheel-Drive Front Axle Oil Level Checking
• Axle Lubricant Level Checking
• Driveline Lubricating
• Foot Brake Valve Actuator Lubricating, Bendix E-12
• Manual Slack Adjuster Lubricating
• Automatic Slack Adjuster Lubricating, Meritor
• Automatic Slack Adjuster Lubricating, Gunite
• Automatic Slack Adjuster Lubricating, Haldex
• Drag Link Lubricating
• Power Steering Reservoir Fluid Level Checking
• Steering Gear Lubricating (Ross TAS Series)
• Weatherstrip, Door Hinge, and Door Latch Lubricating
General Information 00
M1 Maintenance Interval Operations Table: 00–10
Business Class Trucks Maintenance Manual, February 2004 00/17
To Next Page
Loading...
