FreshWater AG+ User Manual

FRESHWATER AG+
®
ACE ADAPTER INSTALLATION INSTRUCTIONS
The FreshWater
Ag+
adapter gives a Hot Spring
®
Spa or Limelight
®
hot tub owner the ability to use the
FreshWater
Ag+
Silver Ion Cartridge and ACE
®
System simultaneously. The following instructions
illustrate how to attach the FreshWater
Ag+
adapter to either a Hot Spring
®
Spa or a Limelight
®
hot tub:
FreshWater
Ag+
Adapter
attached to a Hot Spring Filter
(Tri-X
®
or Standard Paper 30 sq. ft)
FreshWater
Ag+
Adapter
attached to a Limelight Filter
(65 sq. ft.)
Hot Spring Installation:
1. Attach the FreshWater
Ag+
Silver Ion
Cartridge to the FreshWater
Ag+
adapter.
2. Remove the lter cap with cell, and lter.
3. Place FreshWater
Ag+
adapter around the
standpipe resting it on the botom of the lter
bucket.
=
4. Replace lter, lower ACE cell into standpipe, and fasten the lter using the ACE lter cap.
NOTE: Once installed, the FreshWater
Ag+
Silver Ion Cartridge may be removed without removing the
lter by lifting and twisting the FreshWater
Ag+
Silver Ion Cartridge.

FreshWater AG+ Specifications

General

Brand	FreshWater
Model	AG+
Category	Adapter
Language	English

Summary

Hot Spring Installation

Attach Ag+ Cartridge to Adapter

Attach the FreshWater Ag+ Silver Ion Cartridge to the FreshWater Ag+ adapter.

Remove Filter Components

Remove the filter cap, cell, and the existing filter.

Position Adapter in Bucket

Place the FreshWater Ag+ adapter around the standpipe, resting it on the filter bucket bottom.

Reassemble Filter and ACE Cell

Replace filter, lower ACE cell into standpipe, and fasten with ACE filter cap.

Cartridge Removal Note

The Ag+ Silver Ion Cartridge can be removed without removing the filter by lifting and twisting.

Limelight Installation

Attach Ag+ Cartridge to Adapter

Attach the FreshWater Ag+ Silver Ion Cartridge to the FreshWater Ag+ adapter.

Remove Filter Cap and Cell

Remove the filter cap and the cell.

Attach Filter Cap to Adapter

Place filter cap into the large opening of the FreshWater Ag+ adapter and attach it.

Insert Cartridge and Check Interference

Lower the Ag+ cartridge into the adapter, checking for interference with weir and rotating if needed.