Fretta SJ-029C - Page 8

8
Self feeding hopper slow juicer SJ-029C
NOTE :
Please make sure the unit and parts are dry before storing it.
Press the silicone valve to close it property and tightly after cleaning.
4. To clean the seal ring in the center of the squeezing bowl, please follow the steps as
below :
a.
Turn the Squeezing Bowl upside down for easier handling, Push the seal ring out
with your thumb (Fig 12a) and clean it with water.
b.
After Cleaning, please put it back to the center hole. The small ribbed surface should
be should face upward (Fig.12b) Make sure the groove of the seal ring well fit in
the squeezing bowl.
c. The big flat size of the seal ring will be inside while the small and ribbedside is
outside the Squeezing Bowl. (Fig 12c)
Fig 12a Fig 12b Fig 12c
5. Do not put the Power Base into water for cleaning. Wipe it with damp clothonly.
6. After cleaning, please dry the parts thoroughly and store them in a dry, coolplace.
STORAGE
1. Follow cleaning instructions to well maintain the unit before storage.
2. Tidy up the power cord set.
3. Keep the unit away from children’s easy access.
4. Store the unit and the accessories at a dry, cool place.