Friax MPC 48 - User Menu Functions (continued); Sensor Calibration

MPC
Genesis - Vintage
User menu
Access to
menu
Parameters Screens Manipulations
OK
OK
confirm with
-
+
Change the value with
or
Login with
OK
OK
confirm with
-
+
Change the value with
or
Login with
OK
OK
confirm with
-
+
Change the value with
or
Login with
Remarks
This parameter is
set to 0 at the
factory. It may be
modified only in
the case where
there would be a
difference
between the
seng tempera-
ture and the real
temperature of
the cellar.
This parameter is
set to 0 at the
factory. It may be
modified only in
the case where
there would be a
gap between the
moisture displayed
and the real humi-
dity of the cellar.
Only available on
model Vintage
Lets venlaon at
low speed when
the air condioner
reaches its setpoint
temperatures and
humidity, to have a
permanent air
circulaon in the
cellar.
It is recommended
to leave this seng
enabled when the
evaporator is
ducng (version
OUT).
Calibrang the
temperature
sensor
Calibraon of
humidity probe
Seng the fan
status when the
setpoint is
reached
Even if the screen
is blank Press
for 6 seconds
Change the
screens with
To exit the menu,
press
16