Do you have a question about the Frico Thermozone AC 300 and is the answer not in the manual?
Details the intended use of Thermozone AC 300 air curtains for stationary installation above or at the side of doors.
Explains how the air curtain draws in air and blows it out at high velocity to create a protective air shield.
Guidance on mounting the unit above doorways, including placement and bracket attachment for angle adjustment.
Instructions for installing units vertically beside doorways when overhead space is limited, using mounting plates.
Guidance on adjusting air stream direction and speed based on door load and environmental factors for optimal efficiency.
Recommendations for setting air flow speed to 3-4 m/s, 1m above the floor, for effective air curtain performance.
Checks for fan issues including power supply, air flow selector, and position limit switch functionality.
Steps to diagnose heating issues: power supply, thermostat, output selector, and overheat protection.
Procedure to reset the overheat protector by accessing the service hatch and pressing red reset buttons.
Ensuring clear airflow paths and warning that unit surfaces are hot during operation.
Instructions for cleaning fan motors, components, and grilles, recommending annual inspection.
Explanation of safety cut-out tripping due to moisture in heating elements and how to rectify it.
Detailed technical data for AC301, AC302, AC308, AC312 models including power, voltage, and airflow.
List of optional accessories such as air flow selectors, output selectors, and mounting plates.
Details of Frico AB as the manufacturer and contact information for their products.
Statements of compliance with EC Low Voltage and Electromagnetic Compatibility Directives.
Contact details for Frico's main office in Sweden and representative offices in Norway, France, and Russia.
| Brand | Frico |
|---|---|
| Model | Thermozone AC 300 |
| Category | Air Conditioner |
| Language | English |








