Why is the Fridja f1500 steam intermittent?
If your Fridja Iron's steam is intermittent, the pressure takes too long to build, or the steam flow is weak, it is likely due to substantial mineral deposits inside the unit. You should clean the appliance as described in the manual.
What to do if steam pressure built up but no steam comes out of my Fridja f1500 Iron?
If steam pressure has built up in your Fridja Iron, but no steam comes out when you press the steam trigger, ensure that the steam hose is connected properly until you hear a click. Also, make sure that the descaling mode is not activated; switch to steaming mode by pressing the button on the back of the steamer handle.
General| Type | Steam Iron |
|---|---|
| Water Tank Capacity | 300 ml |
| Vertical Steam | Yes |
| Weight | 1.2 kg |
| Soleplate Material | Ceramic |
| Anti-Drip System | Yes |
| Anti-Calc System | Yes |
| Auto Shut-Off | Yes |
Guidance on damaged supply cords and keeping them away from heat or sharp edges.
Caution regarding hot steam, scalding, and avoiding water splashing during use.
Covers user capability, supervision, water, additives, unattended operation, steam aiming, and hose/parts handling.
Advice on material compatibility, surface stability, appliance movement, and wheel issues.
Instructions for extending and tightening the stainless steel telescopic pole sections.
Steps for unfolding the hanger and attaching the ironing board support fixture correctly.
Securing the telescopic pole with the pole nut and connecting the steam hose to the main unit.
Instructions for unlocking, hanging, and securing the ironing board to the support fixture.
Steps for preparing the steamer, filling the water tank, and waiting for pressure build-up.
Guidance on hanging clothes, using the steam trigger, and ironing techniques for crease removal.
Instructions for using collar/cuff accessories and properly switching off the appliance.
Guard to prevent delicate materials touching the hot ironing plate. Use on suits, dresses, and embroidered goods.
Brush to refresh and remove lint from bedding, sofas, cushions, and wool.
Step-by-step guide for descaling the steamer, including filling the tank, activating the mode, and steam release.
Guidance on using a 13 amp ASTA approved fuse and the correct wiring colour code for the plug.
Details on refunds, returns, and conditions for returning products bought directly from Fridja Ltd.
Information on the 12-month warranty, repair/replacement policy, and collection for defects within three months.
Procedure for reporting damaged goods within 24 hours of delivery, including providing photos for assessment.
Conditions for the guarantee, including correct installation, operation, and exclusion of accidental damage or misuse.
To Next Page